Skip to content

Setup & Use

Setup & Use of Tix&Mix magnetic wall decal

 

Don't worry, it's really simple :)

  1. Unroll and lay the decal flat on the floor. Weigh down the corners with heavy objects to let the decal “relax” in its stretched position. This will make application easier.
  1. Clean the surface where you will apply the decal with a dry or damp cloth (depending on the surface). Ensure the surface is dry before application.
  1. Start applying from the bottom right corner of the decal. Peel off the protective film, press the corner onto the surface, and continue applying upwards while slowly pulling the film away. Use your other hand to smooth the decal onto the desired surface.
  1. The Press To Stick application system works by pressing harder to make the decal stick better. If you plan to relocate the decal, we recommend not pressing too hard for easier removal. Remove the bubbles with a flat-surfaced item (Hardcover book or something similar) Minimize many bubbles as possible help to adhere decal.
  1. To remove the decal*, carefully and slowly peel it away from the surface, starting at a 45-degree angle. For even safer removal, use a hair dryer to apply hot air while slowly peeling off the edges at a 45 angle. Do it as slowly as possible without sudden movements.

If there is any residue left behind, gently wipe it with a warm, damp cloth.

  1. Cover the sticky side of the removed decal with the included protective film that was originally attached. Pack it back into the original Tix & Mix tube to protect it from dirt and ensure it lasts for future use.

 

Tix & Mix is compatible with:

  1. Chalk markers, chalk, crayons (2 pcs included in the set), or pencils.
  2. All types of magnets and magnetic toys (available at tix-mix.co.uk store). (do not use heavy magnets and toys, to stick well) 

Care:

  • Clean with a damp, soft microfiber cloth.
  • It's not recommended to leave writing/paint on the surface for a long time, as it may make cleaning more difficult.

Please Note:

Tix & Mix decals are designed to stick to walls, windows, mirrors, doors, or furniture. However, the adhesive may not work well on all surfaces. Check Wall Compatibility page on our webside (tix-mix.co.uk)


- It is not recommended to apply the decal to wallpaper, textured**, newly painted, or poorly painted walls.
- Be sure that the surface has enough area for the adhesive to stick on. 
- Over time, chalk markers or chalk may leave marks on the decal.
- Due to different lighting, the actual color of the decal may slightly differ from the photo.
- The Tix&Mix is not responsible for damaged surfaces.

*Minimize removing and reapplying as it weakens the adhesive surface.
**For textured walls, please use additional adhesive tape to adhere corners